HOW LEAFGUARD WORKS

Liquid Adhesion

The Englert LeafGuard gutter system works on the scientific principle of Liquid Adhesion. The gutter’s patented design allows rainwater to travel down and around its curved hood and into the gutter, while deflecting leaves and debris.

LeafGuard gutters are roll-formed from one continuous piece of aluminum, that is 18 inches wide and cut to custom lengths that fit your home. The metal itself is 20% thicker than the industry standard for gutters.

A LeafGuard Brand gutter is formed on-site by machines under the supervision of factory trained servicemen. The single sheet of flat metal is formed into an extra wide gutter channel with a perfectly arched cover. This cover is not an add-on, but an integral part of the gutter itself.

It will catch rainwater; but will NEVER clog. Its large gutter bottom and extra-large 3” x 4” downspouts can handle even the heaviest rainfalls. In a simulated laboratory test, LeafGuard Brand gutters were able to handle 32 inches of rain per hour – over three times the record rainfall ever recorded by the U.S. Weather Bureau.

Additional Features

LeafGuard features a ScratchGuard® paint finish, that won’t chip, peel or crack as many other gutters do. ScratchGuard® keeps your gutters looking better longer and it’s warranteed for the life of your gutter.

In addition to their built-in ingenuity, attention is paid to every detail in the installation of a LeafGuard gutter. Specially designed, non-corrosive hangers support the hood and are attached through the back of the gutter to your fascia board with screws, not nails, which can pull away from wood. The hangers are spaced at two-foot intervals, which is more than twice the industry standard, ensuring added strength and durability.

All these features work perfectly together, to give you a one-piece gutter bottom and hood that deflects leaves and debris better than any other gutter protection system; that will not clog or cause leaks; and that does not interfere with the integrity of your roof.

This process is unique and it’s patented!

What Is Liquid Adhesion?

Liquid adhesion is a principal of physics. Simply stated, as liquids flow they adhere to the surface they are traveling across – especially when the surface is curved or round.

The LeafGuard gutter design is based upon this principal. It is a one-piece gutter with a rounded top surface, and gutter trough below.

Clog Free. Guaranteed.

Enjoy clog-free gutters with LeafGuard Brand by Englert. Only LeafGuard gutters can make this claim. They are unique in the marketplace as the only, one-piece, covered gutter system made today. 

If your gutters ever do clog, we’ll come out and clean them for free.  That’s how confident we are in our unique gutter system.

Get Your Free Estimate!

Turn Your Home Into A Work Of Art Today
Your information is 100% safe with us and will never be shared
  • clogfreeleafguard@gmail.com
  • (864) 640-4527

ADDRESS

  • 12 Distribution Court
    Greer, SC 29650
    (864) 640-4527

GET IN TOUCH

Close Menu